Recently Completed Projects

  • Cairns Cleaner Seas
  • Nikenbah Waste WTP
  • Gateway Upgrade
  • North South Bypass Tunnel
  • Mt St Johns WTP
  • Elanora WWTP
  • Southbank Boardwalk Redevelopment
  • Nebo Road WTP
  • Cairns Cruise Liner
  • Parkland Retirement Village
  • QR Security Upgrade
  • Dept of Defence - Cabarlah Barracks
  • Dept of Defence - Lavarack Barracks
  • Wolston Park Hospital
     
 


 

 

 

Categories » Power Protection » Power Filters - Hardwired

These filter out electrical noise but do not protect against prolonged voltage dips or power outages. Multi-Stage Series Filters utilise surge diverters and LC networks in combination.

It is best to choose a filter with a high surge rating as they offer excellent protection from lightning induced spikes & surges. Both plug-in (plugs into a normal GPO) and hardwired (installed into an electrical switchboard) power filters are available. Many "budget priced" power line filters provide little or no actual filtering, however the Novaris brand of power line filters (such as the plug-in PP10 series, or the hardwired SF series) are fully functional low pass filters designed to effectively filter low and high frequency noise that may be caused by lightning strikes and other electrical disturbances as well as radio frequency interference.

Novaris filters remove noise that may appear between active and neutral, active and earth and neutral and earth. This is called all mode filtering. Novaris power line filters contain high-energy metal oxide varistors in an all mode configuration on both the line and load sides. These two stages plus the filter circuit ensure effective protection for even the most sensitive equipment.

Products

SFD Combined Power and Signal Protectors
Product Code: SFD1
Novaris protection for both power and signal is provided in one compact and economical DIN compliant fail-safe metal enclosure. Ideal for security and CCTV camera protection.

PDF Brochure
Qty:
Surge Filter DINrail Mount Single & Three Phase
Product Code: SFD1 & SFD3
2, 6, 10 & 20 Amp hardwired single and three phase power filters available in a variety of surge and voltage ratings. DINRail mount with various indication/alarm configurations.

PDF Brochure
Qty:
Surge Filter Medium Current Single & Three Phase
Product Code: SFM1 & SFM3
Novaris SFM filters provide excellent and effective Main Switch Board and Distribution Board protection for critical equipment. 40, 63 & 125 Amps per phase available.

PDF Brochure - 40 & 63 Amp
PDF Brochure - 125Amp
Qty:
Surge Filter Hardwired Three Phase
Product Code: SFH3
Novaris SFH surge filters provide the highest level of protection with the lowest let through voltage. When installed at a main switchboard Novaris surge filters will protect all connected equipment. From 250 Amps per phase.

PDF Brochure
Qty: